Analytical Modelling Segmented Switched Reluctance Linear Synchronous Motor (SSRLSM) Using Permeance Analysis Model (PAM)

Authors

Keywords:

Analytical modelling, Linear switched reluctance motor, Magnetic equivalent circuit, Permeance model.

Abstract

This paper discusses the analytical modelling of a segmented switched reluctance linear synchronous motor (SSRLSM) using a magnetic equivalent circuit (MEC) based on the permeance analysis method (PAM). The PAM is applied to obtain the MEC of the SSRLSM, considering the flux path pattern in the air gap region between the stator and mover. The PAM is used to create the air gap permeance model. The developed permeance model was transformed into a MEC. The MEC corresponds to an electrical circuit based on the geometry of the machine and the estimated magnetic flux path to solve the SSRLSM thrust performance analysis. The equation is derived from the MEC of the SSRLSM and used to analyse the characteristics of the thrust performance of the SSRLSM. The effect of mover position and phase current on the thrust is investigated and analysed. To validate the model of the SSRLSM, the thrust characteristics were compared with FEM and measurement results. The comparison shows good agreement.

Author Biographies

Norrimah Abdullah, Universiti Kuala Lumpur Malaysia French Institute

Norrimah Abdullah is a lecturer in Electrical Engineering Department at the Universiti Kuala Lumpur – Malaysia France Institute (UniKl - MFI), Kuala Lumpur, Malaysia. She received her B.Eng. degree in Electrical Engineering from Universiti Malaya in 2001, while for M. Sc in Instrumentation Engineering from Universiti Putra Malaysia in 2008. Currently, she is pursuing a PhD at UTeM. Her research interests include electrical machines, motor drives, industrial measurement and instrumentation, and magnetic sensors.

Fairul Azhar Abdul Shukor, Universiti Teknikal Malaysia Melaka

Fairul Azhar Abdul Shukor is a lecturer in Electrical Engineering Department, Universiti Teknikal Melaka Malaysia (UTeM), since 2006. He received his B.Eng. degree in electrical engineering and the M.Eng. degree in electrical power, both from Universiti Putra Malaysia, Serdang, Malaysia, in 2002 and 2009, respectively; and his Ph.D. degree in Electrical Machine Design from Shinshu University Nagano, Japan, in 2015. He is also a member and auditor of the Board of Engineers Malaysia and the Malaysia Board of Technologists. Currently, he is an Academic Deputy Dean at the Faculty of Electrical Engineering Department, Universiti Teknikal Melaka Malaysia (UTeM). His research interests include the field of electrical machine design, motor drives, power electronics, and a magnetic sensor.

Raja Nor Firdaus Kashfi Raja Othman, Universiti Teknikal Malaysia Melaka

Raja Nor Firdaus Kashfi Raja Othman is the Associate Professor at the Faculty of Electrical Engineering, Universiti Teknikal Melaka Malaysia (UTeM), since 2014. He received the B.Eng., M.Sc., and PhD in Electrical Power Engineering from Universiti Putra Malaysia, Serdang, Malaysia, in 2006, 2009 and 2013, respectively. His research interest includes the field of applied magnetics, electrical machines, magnetic sensor and drives.

Suhairi Rizuan Che Ahmad, University Kuala Lumpur British Malaysia Institute

Suhairi Rizuan Che Ahmad is a senior lecturer in Electrical Technology Section, Universiti Kuala Lumpur-British Malaysian Institute (UniKL-BMI), Selangor, Malaysia. He received the B. Eng. in Industrial Electronics from Universiti Malaysia Perlis, Malaysia in 2009, M. Sc. in Electrical Power Engineering from Universiti Putra Malaysia, Malaysia in 2012, respectively; and PhD degree in Electrical Power Engineering from Universiti Teknikal Malaysia Melaka in 2019. He is currently Head of Section in Electrical Techcnology Department in UniKL-BMI. His research interests are electrical machine design, electric machine simulation, electric drives, energy conversion, and renewable energy.

Nur Ashikin Mohd Nasir, Universiti Teknikal Malaysia Melaka

Nur Ashikin Mohd Nasir is currently a PhD candidate in electrical engineering at the Universiti Teknikal Malaysia Melaka (UTeM). She received her B. Eng. Degree in Electrical Engineering (Power Electronics and Drives) and M. Eng. degree in Electrical Engineering from UTeM in 2016 and 2019, respectively. The field of her research interests are power electronics, motor drives, and electrical machines

References

D. Wang, Z. Feng and H. Zheng, Comparative analysis of different topologies of linear switched reluctance motor with segmented secondary for vertical actuation systems, IEEE Transaction on Energy Conversion, 36(4), 2021, 2634-2645.

A. Malekpour Shahraky, S. Sheikhkanloy, H. Torkaman and M. S. Toulabi, Design and performance prediction of a novel linear switched reluctance motor, Electric Power Components System, 49(1–2), 2021, 171-183.

A. Ghaffarpour, M. Vatani, M. A. J. Kondelaji and M. Mirsalim, Analysis of linear permanent magnet switched reluctance motors with modular and segmental movers, IET Electric Power Applications, 17(6), 2023, 756-772.

N. Abdulah, F. A. A. Shukor, R. N. F. K. R. Othman, S. R. C. Ahmad and N. A. M. Nasir, Modelling methods and structure topology of the switched reluctance synchronous motor type machine: A review, International Journal of Power Electronics and Drive Systems, 14(1), 2023, 111-122.

C. S. Obbu and S. Lakhimsetty, Design of a linear permanent magnet synchronous motor with minimized cogging force, IEEE IAS Global Conference on Renewable Energy and Hydrogen Technologies (GlobConHT), Male, Maldives, 2023.

D. Wang, X. Du, D. Zhang and X. Wang, Design, optimization, and prototyping of segmental-type linear switched-reluctance motor with a toroidally wound mover for vertical propulsion application, IEEE Transactions on Industrial Electronics, 65(2), 2017, 1865-1874.

R. F. L. Santos and L. A. R. Tria, Evaluation of a modular stator, segmented rotor switched reluctance motor, IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), Macao, China, 2019, 866-872.

S. R. Mousavi-Aghdam, M. R. Feyzi and N. Bianchi, Analysis and comparison study of novel stator-segmented switched reluctance motor, Iranian Journal of Electrical and Electronic Engineering, 13(1), 2017, 68-76.

A. Sohrabzadeh, H. Torkaman and A. Yousefi Javid, Improvement undesirable characteristics of the switched reluctance motor with triangular rotor structure, IEEE Transactions on Energy Conversion, 38(3), 2023, 2118-2125.

P. Andrada, B. Blanqué, M. Torrent and P. Kobeaga, Segmented stator switched reluctance motor drive for light electric vehicle, International Journal of Electrical and Computer Engineering Research, 3(1), 2023, 18-23.

CV Aravind, N. Misron, A. Saadha, F. Azhar, A. A. Stonier and D. S. Vanaja, System design, analysis, and experimental investigations of linear switched reluctance machines with double mover configuration, Journal of Vibration and Control, 2023.

F. Rezaee-Alam, A. Nazari Marashi and S. Roozbehani, Modified magnetic equivalent circuit model for magnetic field analysis of one cage-rotor induction motor used in electric submersible pumps, IET Electric Power Applications, 17(6), 2023, 802-812.

W. Uddin and Y. Sozer, Analytical modeling of mutually coupled switched reluctance machines under saturation based on design geometry, IEEE Transactions on Industry Applications, 53(5), 2017, 4431-4440.

G. Davarpanah and J. Faiz, A novel structure of switched reluctance machine with higher mean torque and lower torque ripple, IEEE Transactions on Energy Conversion, 35(4), 2020, 1859-1867.

M. Yilmaz and P. T. Krein, Capabilities of finite element analysis and magnetic equivalent circuits for electrical machine analysis and design, IEEE Power Electronics Specialists Conference, Rhodes, Greece, 2008, 4027-4033.

R. Krishnan, Switched Reluctance Motor Drives - Modeling, Simulation, Analysis, Design, and Applications. CRC Press, 2017.

B. Ganji and M. H. Askari, Analysis and modeling of different topologies for linear switched reluctance motor using finite element method, Alexandria Engineering Journal, 55(3), 2016, 2531-2538.

M. Golzarzadeh and B. Ganji, Analytical modelling of the linear switched reluctance motor with segmental translator, IET Electric Power Applications, 13(4), 2019, 527-537.

M. El-Nemr, M. Afifi, H. Rezk and M. Ibrahim, Finite element based overall optimization of switched reluctance motor using multi-objective genetic algorithm (NSGA-II), Mathematics, 9(5), 2021, 576.

V. Naeini, A detailed magnetic equivalent circuit modeling for torque ripples minimizing of a switched reluctance motor, International Transactions on Electrical Energy Systems, 29(10), 2019, 1-14.

M. Johnson, M. C. Gardner and H. A. Toliyat, A parameterized linear 3D magnetic equivalent circuit for analysis and design of radial flux magnetic gears-Part I: Implementation, IEEE Transactions on Energy Conversion, 36(4), 2021, 2894-2902.

N. A. M. Nasir, F. A. Shukor, N. M. Zuki and R. N. F. K. R. Othman, Design of the segmented-type switched reluctance linear synchronous motor (SSRLSM) for domestic lift application, Progress In Electromagnetics Research C, 108, 2021, 13-22.

G. Davarpanah, S. Mohammadi and J. L. Kirtley, Modelling of switched reluctance machines, IET Electric Power Applications, 14(11), 2020, 2146-2153.

M. A. J. Kondelaji and M. Mirsalim, Segmented-rotor modular switched reluctance motor with high torque and low torque ripple, IEEE Transactions on Transportation Electrification, 6(1), 2020, 62-72.

Y. Hao et al., Torque analytical model of switched reluctance motor considering magnetic saturation, IET Electric Power Applications, 14(7), 2020, 1148-1153.

T. -K. Hoang, L. Vido and D. -Q. Nguyen, A simple approach for air-gap permeance calculations in double excitation synchronous motor modelling with reluctance network, Vietnam Journal of Science, Technology and Engineering, 63(2), 2021, 25-31.

Downloads

Published

16-04-2024

How to Cite

Abdullah, N., Abdul Shukor, F. A., Raja Othman, R. N. F. K., Che Ahmad, S. R., & Mohd Nasir, N. A. (2024). Analytical Modelling Segmented Switched Reluctance Linear Synchronous Motor (SSRLSM) Using Permeance Analysis Model (PAM). Applications of Modelling and Simulation, 8, 93–100. Retrieved from https://www.ojs.arqiipubl.com/index.php/AMS_Journal/article/view/562

Issue

Vol. 8 (2024)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors hold and retain copyright, and grant the journal right of first publication, with the work after publication simultaneously licensed under a Creative Commons Attribution 4.0 License CC BY that permits any use, reproduction and distribution of the work and article without further permission provided that the original work is properly cited.

Authors are permitted and encouraged to post their work online in institutional repositories, website and other social media before and after publication, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Similar Articles

<< < 1 2 3 4 5 6 7 

You may also start an advanced similarity search for this article.